design and specifications are each subject to change without notice. ask factory for the current technical specifications before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. conductive polymer aluminum solid capacitors + ? f d l p r c w h 0.2 max. lot. no. polarity marking (?) series r. capacitance r. voltage surface mount type series : svps 105 c 5000 h rohs compliance, halogen free features size code a5 b6 c6 e7 f8 category temperature range ?55 c to +105 c rated capacitance range 4 v.dc to 10 v.dc 4 v.dc to 16 v.dc 4 v.dc to 20 v.dc 4 v.dc to 25 v.dc 4 v.dc to 16 v.dc rated capacitance range 10 f to 33 f 22 f to 68 f 22 f to 150 f 10 f to 270 f 100 f to 680 f capacitance tolerance 20 % (120 hz / + 20 c) leakage current please see the attached characteristics list dissipation factor (tan ) please see the attached characteristics list endurance +105 c, 5000 h, rated voltage applied (25 v.dc 20 v.dc applied) capacitance change within 20 % of the initial value tan < 150 % of the initial limit dc leakage current within the initial limit damp heat (steady state) +60 c, 90 % to 95 %, 1000 h, no-applied voltage capacitance change within 20 % of the initial value tan < 150 % of the initial limit dc leakage current within the initial limit (after voltage processing) marking dimensions (not to scale) unit : mm size code f d0.5 l +0.1 w0.2 h0.2 c0.2 r p0.2 a5 4.0 5.4 4.3 4.3 5.0 0.6 to 0.8 1.0 b6 5.0 5.9 5.3 5.3 6.0 0.6 to 0.8 1.4 c6 6.3 5.9 6.6 6.6 7.3 0.6 to 0.8 2.1 e7 8.0 6.9 8.3 8.3 9.0 0.6 to 0.8 3.2 f8 10.0 7.9 10.3 10.3 11.0 0.6 to 0.8 4.6 ?0.4 speci cations ? externals of ? gure are the reference. feb. 2017 02 downloaded from: http:///
design and specifications are each subject to change without notice. ask factory for the current technical specifications before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. conductive polymer aluminum solid capacitors series rated voltage (v.dc) rated capacitance (f) case size (mm) size code specifications standard (reel size : f 380) f d l ripple ? 1 current (mar.m.s.) esr ? 2 (m max.) tan ? 3 lc ? 4 (a) part number min. packaging q'ty (pcs) svps 4.0 33 4.0 5.4 a5 740 200 0.15 66 4svps33m 2000 68 5.0 5.9 b6 1970 30 0.12 300 4svps68m 1500 150 6.3 5.9 c6 2570 22 0.12 300 4svps150m 1000 270 8.0 6.9 e7 3220 22 0.12 500 4svps270m 1000 680 10.0 7.9 f8 4130 20 0.12 544 4svps680m 500 6.3 22 4.0 5.4 a5 740 200 0.12 69.3 6svps22m 2000 47 5.0 5.9 b6 1970 30 0.12 300 6svps47m 1500 120 6.3 5.9 c6 2570 22 0.12 300 6svps120m 1000 220 8.0 6.9 e7 3220 22 0.12 500 6svps220m 1000 470 10.0 7.9 f8 4130 20 0.12 592 6svps470m 500 10 10 4.0 5.4 a5 700 220 0.10 50 10svps10m 2000 15 4.0 5.4 740 200 0.10 75 10svps15m 2000 33 5.0 5.9 b6 1100 70 0.12 165 10svps33m 1500 68 6.3 5.9 c6 2200 30 0.12 300 10svps68m 1000 150 8.0 6.9 e7 2760 30 0.12 500 10svps150mx 1000 10.0 7.9 f8 3020 30 0.12 300 10svps150m 500 330 10.0 7.9 3770 24 0.12 660 10svps330m 500 16 22 5.0 5.9 b6 1060 90 0.10 176 16svps22m 1500 39 6.3 5.9 c6 2460 24 0.12 300 16svps39m 1000 82 8.0 6.9 e7 2760 30 0.12 262 16SVPS82M 1000 100 10.0 7.9 f8 2670 35 0.12 320 16svps100m 500 180 10.0 7.9 3430 29 0.12 576 16svps180m 500 20 22 6.3 5.9 c6 1450 60 0.10 88 20svps22m 1000 47 8.0 6.9 e7 1890 45 0.12 188 20svps47m 1000 25 10 8.0 6.9 1500 60 0.10 125 25svps10m 1000 ? 1 ripple current (100 khz/ +105 c ), : the surface temperature of aluminum case top must not exceed 105 c. a rise in temperature due to self-heating by ripple current should be factored in. ? 2 esr (100 khz to 300 khz/+20 c) ? 3 tan (120 hz/+20 c) ? 4 after 2 minutes please refer to each page in this catarog for ?reflow conditions? and ?taping specifications?. frequency 120 hz < f < 1 khz 1 khz < f < 10 khz 10 khz < f < 100 khz 100 khz < f < 500 khz coef? cient 0.05 0.3 0.7 1 frequency correction factor for ripple current characteristics list feb. 2017 02 downloaded from: http:///
if you want to use our products described in this onlin e catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially caus e personal injury (e.g. aircraft and aerospace equipment, traffic and transportat ion equipment, combustion equipment, medical equipment, accident prevention, anti-crime eq uipment, and/or safety equipment), it is necessary to verify whether the specificatio ns of our products fit to such applications. please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. the quality and performance of our products as described in this online catalog only apply to our products when used in isolation. therefore, please en sure you evaluate and verify our products under the specific circumstances in which our pr oducts are assembled in your own products and in which our products will actually be used. if you use our products in equipment that requires a h igh degree of reliability, regardless of the application, it is recommended that you set up protectio n circuits and redundancy circuits in order to ensure safety of your equipment. the products and product specifications described in this online catalog are subject to change for improvement without prior notice. therefore, pleas e be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, pu rchase, or use our products. the technical information in this online catalog provides example s of our products' typical operations and application circuits. we do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. if any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and ex port control, shall be observed. the switchover date for compliance with the rohs directive /reach regulations varies depending on the part number or series of our products. when you use the inventory of our products for which it is unc lear whether those products are compliant with the rohs directive/reach regulation, please se lect "sales inquiry" in the website inquiry form and contact us. we do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. guidelines and precautions regarding the described in this online catalog. downloaded from: http:///
|
